Research on the Synthesis and Property of Poly(glycolic) Acid via Melt/Solid Polycondensation

Ai-jun CUI; Wei-liang LU; Ze-yun WANG; Jun-kai TIAN; Qun CHEN; Ming-yang HE

您当前的位置：

首页 >

文章列表页 >

Research on the Synthesis and Property of Poly(glycolic) Acid via Melt/Solid Polycondensation

更新时间：2022-09-18

- Research on the Synthesis and Property of Poly(glycolic) Acid via Melt/Solid Polycondensation
- Polymer Bulletin Vol. 26, Issue 2, Pages: 73-78(2013)
- 作者机构：
  
  常州大学江苏省精细石油化工重点实验室，常州　213164
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2013-02，
  
  Received：11 September 2012，
  
  Revised：19 October 2012，
扫描看全文
Ai-jun CUI, Wei-liang LU, Ze-yun WANG, Jun-kai TIAN, Qun CHEN, Ming-yang HE. Research on the Synthesis and Property of Poly(glycolic) Acid via Melt/Solid Polycondensation. [J]. Polymer Bulletin 26(2):73-78(2013)
DOI：

Ai-jun CUI, Wei-liang LU, Ze-yun WANG, Jun-kai TIAN, Qun CHEN, Ming-yang HE. Research on the Synthesis and Property of Poly(glycolic) Acid via Melt/Solid Polycondensation. [J]. Polymer Bulletin 26(2):73-78(2013) DOI：

摘要

采用熔融/固相缩聚法合成了聚乙醇酸(PGA)可降解高分子材料

其基本反应步骤为:以乙醇酸为原料

先在190℃熔融状态下将乙醇酸脱水制成分子量为2万左右的低聚物

然后将制得的低聚物在190℃下进行固相缩聚以进一步提高分子量

所制备的PGA产物通过IR、DSC、XRD等手段进行表征。重点考察了不同催化剂

催化剂用量、是否熔融、反应温度、反应时间等因素对固相缩聚的影响

并得出熔融/固相缩聚法合成高分子量的聚乙醇酸的较佳工艺条件:反应温度190℃

二水合醋酸锌与等摩尔量的对甲苯磺酸作为催化剂(质量分数为0.4%)

熔融缩聚2h后制得低聚物

然后在190℃下进行固相缩聚

40h后熔融一次

产品粉碎后继续固相缩聚60小时

PGA的重均分子量可达74000左右。

Abstract

Ploy(glycolic) acid (PGA)

as a biodegradable material

was synthesized via melt/solid polycondensation with glycolic as starting material. A general procedure for preparation was as follows: At first

oligomer was prepared by melt-polycondensation of glycolic acid (GA) at 190℃

and then it was subjected to solid-state polycondensation at the same temperature to increase the molecular weight. PGA product was characterized by IR

DSC and X-ray diffractometry. By examining the effect of different catalysts

catalyst amount

melting or not

reaction temperature and time on the polymerization

optimum conditions of the PGA synthesis was obtained as follows:reaction temperature 190℃

0.4% zinc acetate dihydrate and p-toluene sulfonic acid of same Molar as catalyst

melting one time after 40 hours solid polycondensation

then continuous 60 hours solid polycondensation after being crashed into pieces.

关键词

生物可降解材料聚乙醇酸固相缩聚熔融缩聚

Keywords

Biodegradable materialsPloy(glycolic) acidSolid polycondensationMelt polycondensation

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Preparation and Characterization of Polyethylene Dithiobisalate

Chain Extension and Thermal Analysis of Poly(L-lactic acid)

Electrospinning of Biodegradable Materials and Biomaterials and its Applications

Related Author

No data

Related Institution

Key Laboratory of Rubber-plastics,Ministry of Education / Shandong Provincial Key Laboratory of Rubber-plastics,Qingdao University of Science & Technology

Department of Chemistry , Tangshan normal college

Institute of Nano- and Bio- Polymeric Materials, School of Materials Science and Engineering, Tongji University

⁰