Mechanical and Hydrolysis Properties of a New Type of Environment Degradable Unsaturated Poly (ester-amide) Resin

Yong-ping AI; Li-juan ZHU

您当前的位置：

首页 >

文章列表页 >

Mechanical and Hydrolysis Properties of a New Type of Environment Degradable Unsaturated Poly (ester-amide) Resin

更新时间：2022-09-18

- Mechanical and Hydrolysis Properties of a New Type of Environment Degradable Unsaturated Poly (ester-amide) Resin
- Polymer Bulletin Vol. 27, Issue 6, Pages: 107-112(2014)
- 作者机构：
  
  井冈山大学建工学院新型低碳环保建材研究所，吉安　343009
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2014-06，
  
  Received：29 December 2012，
  
  Revised：28 December 2013，
扫描看全文
Yong-ping AI, Li-juan ZHU. Mechanical and Hydrolysis Properties of a New Type of Environment Degradable Unsaturated Poly (ester-amide) Resin. [J]. Polymer Bulletin 27(6):107-112(2014)
DOI：

Yong-ping AI, Li-juan ZHU. Mechanical and Hydrolysis Properties of a New Type of Environment Degradable Unsaturated Poly (ester-amide) Resin. [J]. Polymer Bulletin 27(6):107-112(2014) DOI：

摘要

采用本体熔融聚合法制备了一种新型不饱和聚酯酰胺树脂，并对不饱和聚酯酰胺树脂进行了表征。在合成的不饱和聚酯酰胺树脂低聚物中加入一定量的乙酸乙烯酯为交联剂和过氧化苯甲酰-N，N-二甲基苯胺为引发-促进剂在室温下预交联后热处理深度交联。研究了交联剂含量及热处理条件对深度交联后的不饱和聚酯酰胺力学及水解性能的影响。结果表明，提高热处理温度和时间或增加交联剂的含量都可以显著提高交联后的不饱和聚酯酰胺树脂的力学及水解性能，但都有一最佳值。

Abstract

A new type of unsaturated poly (ester-amide) resin was prepared by melt polycondensation and characterized. Some vinyl acetate as crosslinker and benzoyl peroxide and N

N-Dimethylanilline as initiation-accelerant agent

then crosslinking at room temperature and heat treatment to make it depth crosslinked The mechanical and hydrolysis properties of crosslinked unsaturated poly (ester-amide) resin were studied. The results shown as heat treatment temperature

time or crossliner content raised

the mechanical and hydrolysis properties of crosslinked unsaturated poly (ester-amide) resin could be increased observably

but all have the best values.

关键词

不饱和聚酯酰胺树脂力学性能水解性能

Keywords

Unsaturated poly (ester-amide) resinMechanical propertiesHhydrolysis properties

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research Progress on Process Optimization of 3D-printed Poly(ether ether ketone) by Fused Deposition Modeling

In Situ Thermal/Force Field-assisted Fused Filament Fabrication: Current Status and Prospects

Research Progress on Mechanical Properties of Fibre Reinforced Polymer at Elevated Temperatures

Effect of Compatibilizer on Properties of Chloroprene Rubber/Natural Rubber Blends

Dynamic Mechanical Properties and Rheological Behavior of PVC Modified by ASA Co-polymer Based on MAP-POSS

Related Author

No data

Related Institution

Lanzhou Stomatology Hospital

State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Acaodemy of Sciences

Key Laboratory of Environment-Friendly Composite Materials of the State Ethnic Affairs Commission; Gansu Provincial Biomass Function Composites Engineering Research Center; Key Laboratory for Utility of Environment-Friendly Composite Materials and Biomass in University of Gansu Province, College of Chemical Engineering, Northwest Minzu University

Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai

Chongqing College of Chinese Academy of Sciences

⁰