3D Printing of Plant Fiber/Polymer Composites with Different Physical States

Jia-nan SHI; Wen LEI

doi:10.14028/j.cnki.1003-3726.2022.05.002

您当前的位置：

首页 >

文章列表页 >

3D Printing of Plant Fiber/Polymer Composites with Different Physical States

更新时间：2022-09-09

- 3D Printing of Plant Fiber/Polymer Composites with Different Physical States
- Polymer Bulletin Vol. 35, Issue 5, Pages: 10-16(2022)
- 作者机构：
  
  南京林业大学理学院,南京 210037
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2022.05.002
  CLC：
- Published：20 May 2022，
  
  Received：14 December 2020，
  
  Revised：21 September 2021，
扫描看全文
Jia-nan SHI, Wen LEI. 3D Printing of Plant Fiber/Polymer Composites with Different Physical States. [J]. Polymer Bulletin 35(5):10-16(2022)
DOI：

Jia-nan SHI, Wen LEI. 3D Printing of Plant Fiber/Polymer Composites with Different Physical States. [J]. Polymer Bulletin 35(5):10-16(2022) DOI： 10.14028/j.cnki.1003-3726.2022.05.002.

摘要

植物纤维/聚合物复合材料中所选取植物纤维的物理状态不同对复合材料的加工成型和成型后复合材料的性能都有一定的影响。综述了不同物理状态的粉末状纤维、短切纤维、连续纤维在增强聚合物中各自存在的优势及缺陷以及在3D 打印这种新兴成型方式中的应用。将植物纤维/聚合物的3D 打印成型与传统挤出、注塑等加工方式进行了比较

分析了采用不同加工方法加工不同物理状态植物纤维/聚合物时

各种工艺的优缺点。同时

对不同物理状态植物纤维/聚合物复合材料的未来研究方向进行了分析与展望。

Abstract

The different physical states of plant fiber/polymer composites have a certain influence on the processing and properties of the composites. The advantages and disadvantages of powder fibers

chopped fibers and continuous fibers with different physical states in reinforced polymers and their applications in 3D printing are reviewed. The 3D printing of plant fiber/polymer was compared with traditional extrusion and injection molding

and the advantages and disadvantages of different processing methods were analyzed.At the same time

the future research directions of plant fiber/polymer composites with different physical states are analyzed and prospected.

关键词

植物纤维聚合物3D打印物理状态

Keywords

Plant fiberPolymer3D PrintingPhysical state

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research Development of Natural Fibers and Their Extractives Reinforced Polymer Materials for 3D Printing

Research Progress on Magnetic Filler/Polymer Based Electromagnetic Interference Shielding Materials

Progress in Flexible Composite Electromagnetic Wave Absorbing Materials

Research Progress on Main Factors of Plant Fiber Reinforced Polyethylene

Study on Ultrathin Cryo-section of Several Rubbers and Elastomers

Related Author

No data

Related Institution

College of Science,Nanjing Forestry University

Jiangsu Key Laboratory of 3D Printing Equipment and Application Technology, Nantong Institute of Technology

School of Materials Science and Engineering, Liaocheng University

Beijing Key Laboratory for Sensors, Beijing Information Science & Technology University

College of Instrument Science and Optoelectronic Engineering, Beijing Information Science & Technology University

⁰