Research Progress on Hot-melt Joining of Fiber Reinforced Thermoplastic Resin Matrix Composites and Metal

LIU Meng-ke; YAN Chun; ZHU Ying-dan; YUAN Qing-peng; CHEN Gang; LIU Dong; XU Hai-bing; SHEN Jiang-nan

doi:10.14028/j.cnki.1003-3726.2024.24.130

您当前的位置：

首页 >

文章列表页 >

Research Progress on Hot-melt Joining of Fiber Reinforced Thermoplastic Resin Matrix Composites and Metal

更新时间：2024-11-20

- Research Progress on Hot-melt Joining of Fiber Reinforced Thermoplastic Resin Matrix Composites and Metal
- Polymer Bulletin Vol. 37, Issue 11, Pages: 1535-1549(2024)
- 作者机构：
  
  1.浙江工业大学化学工程学院，杭州 310014
  2.浙江省机器人与智能制造装备技术重点实验室，中国科学院宁波材料技术与工程研究所，宁波 315201
  3.武汉路特斯汽车有限公司，武汉 430090
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2024.24.130
  CLC：
- Published：20 November 2024，
  
  Published Online：20 July 2024，
  
  Received：26 April 2024，
  
  Accepted：21 June 2024
- 稿件说明：
移动端阅览
刘孟珂, 颜春, 祝颖丹, 袁清鹏, 陈刚, 刘东, 徐海兵, 沈江南. 纤维增强热塑性树脂基复合材料与金属热熔连接技术的研究进展. 高分子通报, 2024, 37(11), 1535–1549

Liu, M. K.; Yan, C.; Zhu, Y. D. Yuan, Q. P.; Chen, G.; Liu, D.; Xu, H. B.; Shen, J. N. Research progress on hot-melt joining of fiber reinforced thermoplastic resin matrix composites and metal. Polym. Bull. (in Chinese), 2024, 37(11), 1535–1549
刘孟珂, 颜春, 祝颖丹, 袁清鹏, 陈刚, 刘东, 徐海兵, 沈江南. 纤维增强热塑性树脂基复合材料与金属热熔连接技术的研究进展. 高分子通报, 2024, 37(11), 1535–1549 DOI： 10.14028/j.cnki.1003-3726.2024.24.130.

Liu, M. K.; Yan, C.; Zhu, Y. D. Yuan, Q. P.; Chen, G.; Liu, D.; Xu, H. B.; Shen, J. N. Research progress on hot-melt joining of fiber reinforced thermoplastic resin matrix composites and metal. Polym. Bull. (in Chinese), 2024, 37(11), 1535–1549 DOI： 10.14028/j.cnki.1003-3726.2024.24.130.

摘要

纤维增强热塑性树脂基复合材料具有轻质高强、耐腐蚀、耐疲劳、成型周期短、生产效率高且可回收再利用等优点，广泛应用于航空航天、汽车、船舶、能源、化工等领域。纤维增强热塑性树脂基复合材料通过与金属的连接可充分发挥两者各自的优越特性，同时减轻其重量而备受关注，实现两者之间的可靠性连接已成为研究的热点之一。本文综述了热塑性树脂基复合材料与金属采用激光焊接、热压、注塑成型、超声波焊接、摩擦焊接、电阻焊接等热熔连接技术的原理以及金属表面处理和连接工艺条件对界面粘结性能的影响，分析了各种连接技术的优缺点，进一步对热塑性树脂基复合材料与金属热熔连接技术的发展趋势进行了展望。

Abstract

Fiber-reinforced thermoplastic resin matrix composites have advantages such as light weight

high strength

corrosion resistance

fatigue resistance

short molding cycle

high production efficiency

and recyclability

which are widely used in aerospace

automotive

shipbuilding

energy

chemical and other industries. The connection between fiber-reinforced thermoplastic resin matrix composites and metals has attracted considerable attention because of their superior characteristics and weight reduction. Achieving reliable connections between the two has become a hot research topic. This work summarizes the research on the principles of laser welding

hot pressing

injection molding

ultrasonic welding

friction welding

resistance welding

and other hot-melt joining technologies between thermoplastic resin matrix composites and metals

as well as the influence of metal surface treatment and joining process conditions on the interface bonding performance. The advantages and disadvantages of various fusion connection technologies are analyzed

and the development trends of hot-melt joining technology for thermoplastic resin matrix composites and metals are further discussed.

关键词

纤维增强热塑性树脂基复合材料金属连接技术表面处理粘结性能

Keywords

Fiber reinforced thermoplastic resin matrix compositesMetalJoining technologySurface treatmentJoint strength

references

邓海, 王超, 杨京浩, 王利忠, 王明辉, 李志刚. 碳纤维增强热塑性复合材料研究进展. 吉林大学学报(工学版), 2023, 53(1), 18-30.

林志勇, 曾汉民. 热塑性碳纤维复合材料界面研究. 高分子通报, 2004, (5), 56-61.

Asmael, M.; Safaei, B.; Kalaf, O.; Zeeshan, Q.; Aldakheel, F.; Nasir, T.; Yang, Z. C.Recent developments in tensile properties of friction welding of carbon fiber-reinforced composite: a review. Nanotechnol. Rev., 2022, 11(1), 1408-1436.

张龙, 解妙霞, 张林杰, 张建勋. 纤维增强热塑性复合材料/金属连接界面调控研究进展. 焊管, 2024, 47(5), 1-10.

陈一哲, 赵越, 王辉. 汽车领域纤维复合材料构件轻量化设计与工艺研究进展. 材料工程, 2020, 48(12), 36-43.

Hao, K. D.; Liao, W.; Zhang, T. D.; Gao, M.Interface formation and bonding mechanisms of laser transmission welded composite structure of PET on austenitic steel via beam oscillation. Compos. Struct., 2020, 235, 111752.

Xu, F.; Liu, S. Y.; Fan, H. Q.; Xu, Y.; Ding, Y. F.Enhancement of the adhesion strength at the metal-plastic interface via the structures formed by laser scanning. Opt. Laser Technol., 2019, 111, 635-643.

Fortunato, A.; Cuccolini, G.; Ascari, A.; Orazi, L.; Campana, G.; Tani, G.Hybrid metal-plastic joining by means of laser. Int. J. Mater. Form., 2010, 3(1), 1131-1134.

Huang, Y. J.; Gao, X. D.; Ma, B.; Zhang, Y. X.Interface formation and bonding mechanisms of laser welding of PMMA plastic and 304 austenitic stainless steel. Metals, 2021, 11(9), 1495.

Cárcel, B.; López, S.; Cárcel, A. C.; Gerard, P.Hybrid laser joining of RTM acrylic glass fiber composite with stainless steel. Procedia CIRP, 2020, 94, 526-530.

廖伟. 304不锈钢与塑料异种材料激光振荡扫描焊接工艺及机理研究. 武汉: 华中科技大学, 2019.

Ashong, A. N.; Lee, Y. S.; Park, K. S.; Lee, M.; Kim, J. H.Effect of HF treatment on the bonding strength of laser-bonded Mg alloy/carbon fiber-reinforced plastic joint: XPS and NEXAFS study. Appl. Surf. Sci., 2021, 556, 149782.

Jiao, J. K.; Jia, S. H.; Xu, Z. F.; Ye, Y. Y.; Sheng, L. Y.; Zhang, W. W.Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method. Compos. Part B Eng., 2019, 173, 106911.

Liu, Y. F.; Tan, C. W.; Zhang, Z. Q.; Su, J. H.; Song, X. G.; Chen, B.; Xia, H. B.; Wu, T.Surface pre-oxidation for enhancing laser assisted joining between carbon fiber reinforced thermoplastic composites and AZ31B Mg alloy. J. Mater. Process. Technol., 2023, 312, 117871.

Jiao, J. K.; Zou, Q.; Ye, Y. Y.; Xu, Z. F.; Sheng, L. Y.Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method. Compos. Part B Eng., 2021, 213, 108738.

Zhang, Z.; Shan, J. G.; Tan, X. H.; Zhang, J.Effect of anodizing pretreatment on laser joining CFRP to aluminum alloy A6061. Int. J. Adhes. Adhes., 2016, 70, 142-151.

Tan, C. W.; Su, J. H.; Liu, Y. F.; Feng, Z. W.; Song, X. G.; Wang, X. B.; Chen, B.; Xia, H. B.Enhanced interfacial bonding strength of laser bonded titanium alloy/CFRTP joint via hydrogen bonds interaction. Compos. Part B Eng., 2022, 239, 109966.

Bu, H. C.; Li, X.; Li, B. B.; Li, X. D.; Zhan, X. H.Enhanced interfacial joining strength of laser wobble joined 6061-T6 Al alloy/CFRTP joint via interfacial bionic textures pre-construction. Compos. Part B Eng., 2023, 261, 110787.

Tao, W.; Su, X.; Chen, Y. B.; Tian, Z.Joint formation and fracture characteristics of laser welded CFRP/TC4 joints. J. Manuf. Process., 2019, 45, 1-8.

Xue, Z. L.; Shen, J. Q.; Hu, S. S.Influence of scanning speed and defocus distance on laser welded PA6GF30/SUS444 dissimilar lap joints. Opt. Laser Technol., 2022, 153, 108223.

Tan, C. W.; Su, J. H.; Zhu, B. H.; Li, X. T.; Wu, L. J.; Chen, B.; Song, X. G.; Feng, J. C.Effect of scanning speed on laser joining of carbon fiber reinforced PEEK to titanium alloy. Opt. Laser Technol., 2020, 129, 106273.

Su, J. H.; Tan, C. W.; Wu, Z. L.; Wu, L. J.; Gong, X. T.; Chen, B.; Song, X. G.; Feng, J. C.Influence of defocus distance on laser joining of CFRP to titanium alloy. Opt. Laser Technol., 2020, 124, 106006.

Katayama, S.; Kawahito, Y.; Mizutani, M.Latest progress in performance and understanding of laser welding. Phys. Procedia, 2012, 39, 8-16.

林微超. Al-TPU一体化注塑成型技术及界面结合性能研究. 金华: 浙江师范大学, 2022.

Abe, H.; Chung, J. C.; Mori, T.; Hosoi, A.; Jespersen, K. M.; Kawada, H.The effect of nanospike structures on direct bonding strength properties between aluminum and carbon fiber reinforced thermoplastics. Compos. Part B Eng., 2019, 172, 26-32.

Gençer, G. M.; Öztoprak, N.Evaluation of hot-pressing scarf joints between polyamide 6,6 (PA66) composite and AA5754-H111 under tensile and flexural loading. Int. J. Adhes. Adhes., 2023, 127, 103512.

Liu, Y. F.; Su, J. H.; Ma, G. L.; Han, X. H.; Tan, C. W.; Wu, L. J.; Chen, B.; Song, X. G.Effect of the laser texturing width on hot-pressing joining of AZ31B and CFRTP. Opt. Laser Technol., 2021, 143, 107350.

Iwata, K.; Suzuki, A.; Kim, S. G.; Takata, N.; Kobashi, M.Enhancing the solid-state joinability of A5052 and CFRTP via an additively manufactured micro-structure. J. Mater. Process. Technol., 2022, 306, 117629.

Zhang, X. Y.; Su, J. H.; Feng, Z. W.; Liu, H. R.; Xia, H. B.; Zhang, Z. Q.; Tan, C. W.; Chen, B.; Song, X. G.Effect of laser textured patterns on the interfacial characteristics and mechanical properties of 6061Al/GFRTP joints via hot-pressing. Thin Walled Struct., 2023, 189, 110916.

Li, X. P.; Liu, F. W.; Gong, N. N.; Yang, C.; Wang, B.Surface topography induced high injection joining strength of polymer-metal composite and fracture mechanism. Compos. Struct., 2018, 184, 545-553.

Wang, S. H.; Kimura, F.; Zhao, S. J.; Yamaguchi, E.; Ito, Y.; Kajihara, Y.Influence of fluidity improver on metal-polymer direct joining via injection molding. Precis. Eng., 2021, 72, 620-626.

Kimura, F.; Yamaguchi, E.; Horie, N.; Suzuki, G.; Kajihara, Y.Formation of boehmite crystals on microblasted aluminum surface to enhance performance of metal-polymer direct joining. Mater. Lett., 2020, 260, 126963.

Zhao, S. J.; Kimura, F.; Wang, S. H.; Kajihara, Y.Chemical interaction at the interface of metal–plastic direct joints fabricated via injection molded direct joining. Appl. Surf. Sci., 2021, 540, 148339.

陈俊祥, 傅南红, 王瑞雪, 党开放, 杨卫民, 谢鹏程. 表面结构对金属/塑料复合注射成型界面结合强度的影响. 中国塑料, 2020, 34(4), 49-53.

Yin, S. Y.; Xie, Y.; Li, R. L.; Zhang, J. H.; Zhou, T.Polymer-metal hybrid material with an ultra-high interface strength based on mechanical interlocking via nanopores produced by electrochemistry. Ind. Eng. Chem. Res., 2020, 59, 12409-12420.

Li, X. P.; Xu, D. H.; Gong, N. N.; Xu, Z. Y.; Wang, L. L.; Dong, W. P.Improving the strength of injection molded aluminum/polyphenylene sulfide lap joints dependence on surface microstructure and composition. Mater. Des., 2019, 179, 107875.

Li, L. J.; Sun, L. Y.; Dai, Z. M.; Xiong, Z. K.; Huang, B. C.; Zhang, Y. B.Experimental investigation on mechanical properties and failure mechanisms of polymer composite-metal hybrid materials processed by direct injection-molding adhesion method. J. Mater. Process. Technol., 2019, 263, 385-395.

Enami, K.; Kimura, F.; Yokoyama, K.; Murakami, T.; Kajihara, Y.Experimental and simulative investigation of the effects of laser-structured metal surface on metal-polymer direct joining. Precis. Eng., 2020, 62, 273-281.

Kimura, F.; Kadoya, S.; Kajihara, Y.Effects of molding conditions on injection molded direct joining under various surface fine-structuring. Int. J. Adv. Manuf. Technol., 2019, 101(9), 2703-2712.

Kadoya, S.; Kimura, F.; Kajihara, Y.PBT–anodized aluminum alloy direct joining: characteristic injection speed dependence of injected polymer replicated into nanostructures. Polym. Test., 2019, 75, 127-132.

Zhao, S. J.; Kimura, F.; Kadoya, S.; Kajihara, Y.Experimental analysis on mechanical interlocking of metal-polymer direct joining. Precis. Eng., 2020, 61, 120-125.

Villegas, I. F.Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters. Compos. Part A Appl. Sci. Manuf., 2014, 65, 27-37.

Kalyan Kumar, R.; Omkumar, M.Investigation of ultrasonic welding of carbon fiber reinforced thermoplastic to an aluminum alloy using a interfacial coating. Mater. Manuf. Process., 2021, 36(11), 1323-1331.

Dal Conte, U. F.; F Villegas, I.; Tachon, J.Ultrasonic plastic welding of CF/PA6 composites to aluminium: Process and mechanical performance of welded joints. J. Compos. Mater., 2019, 53(18), 2607-2621.

Kawakami, K.; Yasuda, K.Utrasonic joining of carbon fiber reinforced thermoplastic and magnesium alloy. 2019 IEEE CPMT Symposium Japan (ICSJ), Kyoto, Japan, 2019, 135-137.

Tamura, R.; Yasuda, K.Ultrasonic joining of carbon fiber reinforced thermoplastic and Ti alloy. 2018 IEEE CPMT Symposium Japan (ICSJ), Kyoto, Japan, 2018, 135-138.

Liu, Z. G.; Li, Y.; Liu, W. D.; Zhou, H. P.; Ao, S. S.; Luo, Z.Enhancing the ultrasonic plastic welding strength of Al/CFRTP joint via coated metal surface and structured composite surface. J. Manuf. Process., 2023, 108, 227-237.

Balle, F.; Wagner, G.; Eifler, D.Ultrasonic metal welding of aluminium sheets to carbon fibre reinforced thermoplastic composites. Adv. Eng. Mater., 2009, 11(1-2), 35-39.

Nagatsuka, K.; Yoshida, S.; Tsuchiya, A.; Nakata, K.Direct joining of carbon-fiber-reinforced plastic to an aluminum alloy using friction lap joining. Compos. Part B Eng., 2015, 73, 82-88.

Wang, S. Y.; Wang, W. Q.; Xu, Y. X.; Tian, Y. T.; Zhang, X. G.; Huang, H.Enhancing bonding synergy and mechanical response of metal/composite hybrid joints through physicochemical surface pretreatment. J. Mater. Process. Technol., 2023, 315, 117923.

徐孟嘉, 刘博生, 毕晓阳, 王振民. 激光加工双级结构对Al/CFRPEEK接头组织及性能的影响. 航空学报, 2022, 43(2), 156-165.

Wu, L. H.; Xiao, B. L.; Nagatsuka, K.; Nakata, K.; Ma, Z. Y.Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment. Compos. Struct., 2020, 242, 112167.

Ota, E.; Matsuda, T.; Shoji, H.; Ogura, T.; Miyasaka, F.; Sano, T.; Ohata, M.; Hirose, A.Friction stir spot welding of aluminum and carbon fiber reinforced thermoplastic using hybrid surface treatment improving interfacial properties. Mater. Des., 2021, 212, 110221.

Mishra, R. S.; Ma, Z. Y.Friction stir welding and processing. Mater. Sci. Eng. R Rep., 2005, 50(1-2), 1-78.

Choi, J. W.; Morisada, Y.; Liu, H. H.; Ushioda, K.; Fujii, H.; Nagatsuka, K.; Nakata, K.Dissimilar friction stir welding of pure Ti and carbon fibre reinforced plastic. Sci. Technol. Weld. Join., 2020, 25(7), 600-608.

Pereira, M. A. R.; Galvão, I.; Costa, J. D.; Amaro, A. M.; Leal, R. M.Joining of fibre-reinforced thermoplastic polymer composites by friction stir welding—a review. Appl. Sci., 2022, 12(5), 2744.

Wang, B.; Sun, Z. Y.; Xu, L. L.; Zhang, W. Y.; Li, X. P.; Zhang, H. Y.Friction spot joining of aluminum AA5052 and short glass fiber-reinforced PPS: effects of material properties and process parameters on joint structure and strength. J. Manuf. Process., 2021, 66, 549-564.

Liu, F. D.; Xu, X. N.; Liu, J. M.; Fan, H. Q.; Huang, G. Z.; Zhang, H.The influence of laser etching biomimicking configuration on the strength of metal-plastic connection. Mater. Res. Express, 2022, 9(5), 056520.

Xiong, X. H.; Zhao, P.; Ren, R.; Zhang, Z. B.; Cui, X.; Ji, S. D.Enhanced resistance-welding hybrid joints of titanium alloy/thermoplastic composites using a carbon-nanotube lamina. Diam. Relat. Mater., 2020, 101, 107611.

Nagatsuka, K.; Xiao, B. L.; Wu, L. H.; Nakata, K.; Saeki, S.; Kitamoto, Y.; Iwamoto, Y.Resistance spot welding of metal/carbon-fibre-reinforced plastics and applying silane coupling treatment. Sci. Technol. Weld. Join., 2018, 23(3), 181-186.

王涣翔, 赵刚, 徐剑. 硅烷偶联剂改性金属加热元件提高碳纤维/聚苯硫醚热塑性复合材料电阻焊接强度. 复合材料科学与工程, 2024, (5), 76-84.

崔旭, 赵普, 熊需海, 张忠宝, 王道晟. 表面处理对TC4钛合金-GF/PEI复合材料电阻焊接强度的影响. 表面技术, 2019, 48(11), 244-251.

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research Progress of Wear Resistance of Rubber Materials

Cellulose-Supported Metal Catalysts : Recent Developments in the Molecular Design and Applications in Organic Transformations

Particle-filled Polymer Composites with High Dielectric Constant

Novel Development in Polymer-Based Metal Composite Materials

Related Author

Zhen YANG

Yu-zhu XIONG

Feng-jun XUE

Yu-ping WEI

Xing-yi HUANG

Qing-quan KE

Ping-kai JIANG

Ping WEI

Related Institution

College of Materials and Metallurgy, Guizhou University

Department of Chemistry,School of Science,Tianjin University

School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University

Shanghai key lab of Electrical Insulation and Thermal Aging

Institute of Composite Materials, Shanghai Jiao Tong University

⁰