Research and Application Progress of Supercritical Fluid Foaming Poly(lactic acid) Technology

LI He; LIU Jia-wei; WANG Wei; YU Hao

doi:10.14028/j.cnki.1003-3726.2026.25.380

您当前的位置：

首页 >

文章列表页 >

Research and Application Progress of Supercritical Fluid Foaming Poly(lactic acid) Technology

更新时间：2026-05-09

- Research and Application Progress of Supercritical Fluid Foaming Poly(lactic acid) Technology
- Polymer Bulletin (2026)
- 作者机构：
  
  联想控股前瞻技术研究院　北京 100190
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2026.25.380
  CLC：
- Received：11 February 2026，
  
  Accepted：24 March 2026，
- 稿件说明：
移动端阅览
李赫, 刘佳薇, 王炜, 于浩. 超临界流体发泡聚乳酸技术研究及应用进展. 高分子通报, doi:10.14028/j.cnki.1003-3726.2026.25.380

Li, H.; Liu, J. W.; Wang, W.; Yu, H. Research and application progress of supercritical fluid foaming poly(lactic acid) technology. Polym. Bull. (in Chinese), doi:10.14028/j.cnki.1003-3726.2026.25.380
李赫, 刘佳薇, 王炜, 于浩. 超临界流体发泡聚乳酸技术研究及应用进展. 高分子通报, doi:10.14028/j.cnki.1003-3726.2026.25.380 DOI：

Li, H.; Liu, J. W.; Wang, W.; Yu, H. Research and application progress of supercritical fluid foaming poly(lactic acid) technology. Polym. Bull. (in Chinese), doi:10.14028/j.cnki.1003-3726.2026.25.380 DOI：

摘要

聚乳酸作为最具产业化潜力的生物基可降解聚合物，其超临界流体发泡技术已成为实现轻质化、功能化应用的关键路径。本文系统综述了近年来超临界流体(主要是超临界CO

)发泡聚乳酸材料的研究进展，重点阐述了本体改性策略、配方复合技术以及发泡工艺革新三个核心方向。通过梳理代表性研究成果，结合当下发泡聚乳酸的应用现状，分析了当前技术瓶颈并展望了未来发展趋势，为高性能生物降解泡沫材料的开发提供理论支撑与实践指导。

Abstract

As one of the most promising bio-based and biodegradable polymers for industrialization

supercritical fluid foaming technology using poly(lactic acid) (PLA) has emerged as a key pathway for achieving lightweight and functional applications. Recent research progress on supercritical fluid (primarily supercritical CO

scCO

) foamed PLA materials is systematically reviewed

with focus on three core directions: bulk modification strategies

formulation compounding technologies

and foaming process innovations. By summarizing representative research findings and integrating the current application status of foamed PLA

this review analyzes the existing technical bottlenecks and outlines future development trends

providing theoretical support and pr

actical guidance for the development of high-performance biodegradable foam materials.

关键词

Keywords

references

Gonzalez, M. F. ; Ruseckaite, R. A. ; Cuadrado, T. R . Structural changes of polylactic-acid (PLA) microspheres under hydrolytic degradation . J. Appl. Polym. Sci. , 1999 , 71 ( 8 ), 1223 – 1230 .

Zaaba, N. F. ; Jaafar, M . A review on degradation mechanisms of polylactic acid: hydrolytic, photo-degradative, microbial, and enzymatic degradation . Polym. Eng. Sci. , 2020 , 60 ( 9 ), 2061 – 2075 .

Shalem, A. ; Yehezkeli, O. ; Fishman, A . Enzymatic degradation of polylactic acid (PLA) . Appl. Microbiol. Biotechnol. , 2024 , 108 ( 1 ), 413 .

Nofar, M. ; Park, C. B . Poly(lactic acid) foaming . Prog. Polym. Sci. , 2014 , 39 ( 10 ), 1721 – 1741 .

Di Maio, E. ; Kiran, E . Foaming of polymers with supercritical fluids and perspectives on the current knowledge gaps and challenges . J. Supercrit. Fluids , 2018 , 134 , 157 – 166 .

Dong, M. Y. ; Wang, G. ; Zhang, X. N. ; Tan, D. Q. ; Jaya Prasanna Kumar, D. ; Ren, J. N. ; Colorado, H. ; Hou, H. ; Toktarbay, Z. ; Guo, Z. H . An overview of polymer foaming assisted by supercritical fluid . Adv. Compos. Hybrid Mater. , 2023 , 6 ( 6 ), 207 .

Villamil Jiménez, J. A. ; Le Moigne, N. ; Bénézet, J. C. ; Sauceau, M. ; Sescousse, R. ; Fages, J . Foaming of PLA composites by supercritical fluid-assisted processes: a review . Molecules , 2020 , 25 ( 15 ), 3408 .

Zhou, Y. J. ; Tian, Y. R. ; Peng, X. W . Applications and challenges of supercritical foaming technology . Polymers , 2023 , 15 ( 2 ), 402 .

任倩 , 黄朋科 , 赵永青 , 汪龙 , 郑文革 . 超临界流体制备聚乳酸发泡材料的研究进展 . 高分子通报 , 2021 , ( 5 ), 52 – 64 .

段续远 , 郑红娟 . 改性聚乳酸发泡技术研究进展 . 中国塑料 , 2021 , 35 ( 7 ), 134 – 139 .

Pilla, S. ; Kim, S. G. ; Auer, G. K. ; Gong, S. Q. ; Park, C. B . Microcellular extrusion-foaming of polylactide with chain-extender . Polym. Eng. Sci. , 2009 , 49 ( 8 ), 1653 – 1660 .

Ludwiczak, J. ; Kozlowski, M . Foaming of polylactide in the presence of chain extender . J. Polym. Environ. , 2015 , 23 ( 1 ), 137 – 142 .

Zhou, M. ; Zhou, P. ; Xiong, P. ; Qian, X. ; Zheng, H. H . Crystallization, rheology and foam morphology of branched PLA prepared by novel type of chain extender . Macromol. Res. , 2015 , 23 ( 3 ), 231 – 236 .

Karkhanis, S. S. ; Matuana, L. M . Extrusion blown films of poly(lactic acid) chain-extended with food grade multifunctional epoxies . Polym. Eng. Sci. , 2019 , 59 ( 11 ), 2211 – 2219 .

Yousefzade, O. ; Jeddi, J. ; Franco, L. ; Puiggali, J. ; Garmabi, H . Crystallization kinetics of chain extended poly(L-lactide)s having different molecular structures . Mater. Chem. Phys. , 2020 , 240 , 122217 .

Li, M. ; Li, S. N. ; Liu, B. J. ; Jiang, T. H. ; Zhang, D. ; Cao, L. S. ; He, L. ; Gong, W . Rheological behavior, crystallization properties, and foaming performance of chain-extended poly(lactic acid) by functionalized epoxy . RSC Adv. , 2021 , 11 ( 52 ), 32799 – 32809 .

Park, M. ; Choi, I. ; Lee, S. ; Hong, S. J. ; Kim, A. ; Shin, J. ; Kang, H. C. ; Kim, Y. W . Renewable malic acid-based plasticizers for both PVC and PLA polymers . J. Ind. Eng. Chem. , 2020 , 88 , 148 – 158 .

Coltelli, M. B. ; Bertolini, A. ; Aliotta, L. ; Gigante, V. ; Vannozzi, A. ; Lazzeri, A . Chain extension of poly(lactic acid) (PLA)–based blends and composites containing bran with biobased compounds for controlling their proces-sability and recyclability . Polymers , 2021 , 13 ( 18 ), 3050 .

Wei, L. Q. ; McDonald, A. G . Peroxide induced cross-linking by reactive melt processing of two biopolyesters: poly(3-hydroxybutyrate) and poly(l-lactic acid) to improve their melting processability . J. Appl. Polym. Sci. , 2015 , 132 ( 13 ), 41724 .

Standau, T. ; Zhao, C. J. ; Murillo Castellón, S. ; Bonten, C. ; Altstädt, V . Chemical modification and foam processing of polylactide (PLA) . Polymers , 2019 , 11 ( 2 ), 306 .

Ikada, Y. ; Jamshidi, K. ; Tsuji, H. ; Hyon, S. H . Stereo complex formation between enantiomeric poly(lactides) . Macromolecules , 1987 , 20 ( 4 ), 904 – 906 .

Na, B. ; Zhu, J. ; Lv, R. H. ; Ju, Y. H. ; Tian, R. P. ; Chen, B. B . Stereo complex formation in enantiomeric polylactides by melting recrystallization of homocrystals: crystallization kinetics and crystal morphology . Macromolecules , 2014 , 47 ( 1 ), 347 – 352 .

Lv, T. X. ; Zhou, C. B. ; Li, J. Q. ; Huang, S. Y. ; Wen, H. Y. ; Meng, Y. F. ; Jiang, S. C . New insight into the mechanism of enhanced crystallization of PLA in PLLA/PDLA mixture . J. Appl. Polym. Sci. , 2018 , 135 ( 2 ), 45663 .

Jia, P. ; Hu, J. ; Zhai, W. T. ; Duan, Y. X. ; Zhang, J. M. ; Han, C. Y . Cell morphology and improved heat resistance of microcellular poly(l-lactide) foam via introducing stereo complex crystallites of PLA . Ind. Eng. Chem. Res. , 2015 , 54 ( 9 ), 2476 – 2488 .

Liu, W. ; He, S. C. ; Yang, Y. J . Effect of stereo complex crystal on foaming behavior and sintering of poly(lactic acid) bead foams . Polym. Int. , 2019 , 68 ( 3 ), 516 – 526 .

Mihai, M. ; Huneault, M. A. ; Favis, B. D. ; Li, H. B . Extrusion foaming of semi-crystalline PLA and PLA/thermoplastic starch blends . Macromol. Biosci. , 2007 , 7 ( 7 ), 907 – 920 .

Ahmed, M. F. ; Li, Y. ; Yao, Z. ; Cao, K. ; Zeng, C. C . TPU/PLA blend foams: enhanced foamability, structural stability, and implications for shape memory foams . J. Appl. Polym. Sci. , 2019 , 136 ( 17 ), 47416 .

Nofar, M. ; Tabatabaei, A. ; Sojoudiasli, H. ; Park, C. B. ; Carreau, P. J. ; Heuzey, M. C. ; Kamal, M. R . Mechanical and bead foaming behavior of PLA-PBAT and PLA-PBSA blends with different morphologies . Eur. Polym. J. , 2017 , 90 , 231 – 244 .

Gao, H. F. ; Li, J. W. ; Li, Z. H. ; Li, Y. Y. ; Wang, X. F. ; Jiang, J. ; Li, Q . Enhancing interfacial interaction of immiscible PCL/PLA blends by in-situ crosslinking to improve the foamability . Polym. Test. , 2023 , 124 , 108063 .

Sun, Z. Y. ; Wang, L. ; Zhou, J. Y. ; Fan, X. ; Xie, H. H. ; Zhang, H. ; Zhang, G. C. ; Shi, X. T . Influence of polylactide (PLA) stereo complexation on the microstructure of PLA/PBS blends and the cell morphology of their microcellular foams . Polymers , 2020 , 12 ( 10 ), 2362 .

Nofar, M. ; Tabatabaei, A. ; Park, C. B . Effects of nano-/ micro-sized additives on the crystallization behaviors of PLA and PLA/CO 2 mixtures . Polymer , 2013 , 54 ( 9 ), 2382 – 2391 .

Ji, G. Y. ; Zhai, W. T. ; Lin, D. P. ; Ren, Q. ; Zheng, W. G. ; Jung, D. W . Microcellular foaming of poly(lactic acid)/silica nanocomposites in compressed CO 2 : critical influence of crystallite size on cell morphology and foam expansion . Ind. Eng. Chem. Res. , 2013 , 52 ( 19 ), 6390 – 6398 .

Nofar, M . Effects of nano-/ micro-sized additives and the corresponding induced crystallinity on the extrusion foaming behavior of PLA using supercritical CO 2 . Mater. Des. , 2016 , 101 , 24 – 34 .

Crawford, E. A. ; Mekonnen, T. H . Effects of chain extension and clay reinforcement on PLA nanocomposite foams. React. Funct . Polym. , 2025 , 209 , 106183 .

Borkotoky, S. S. ; Dhar, P. ; Katiyar, V . Biodegradable poly(lactic acid)/cellulose nanocrystals (CNCs) composite microcellular foam: effect of nanofillers on foam cellular morphology, thermal and wettability behavior . Int. J. Biol. Macromol. , 2018 , 106 , 433 – 446 .

Zheng, T. ; Pilla, S . Melt processing of cellulose nanocrystal-filled composites: toward reinforcement and foam nucleation . Ind. Eng. Chem. Res. , 2020 , 59 ( 18 ), 8511 – 8531 .

Zhang, Y. C. ; Duvigneau, J. ; Sui, X. F. ; Vancso, G. J . Foaming of polylactic acid/cellulose nanocrystal composites: pickering emulsion templating for high-homogeneity filler dispersions . ACS Appl. Polym. Mater. , 2022 , 4 ( 1 ), 111 – 120 .

Corre, Y. M. ; Maazouz, A. ; Duchet, J. ; Reignier, J . Batch foaming of chain extended PLA with supercritical CO 2 : influence of the rheological properties and the process parameters on the cellular structure . J. Supercrit. Fluids , 2011 , 58 ( 1 ), 177 – 188 .

Li, B. ; Zhao, G. Q. ; Wang, G. L. ; Zhang, L. ; Gong, J. ; Shi, Z. L . Super high-expansion poly(lactic acid) foams with excellent oil-adsorption and thermal-insulation properties fabricated by supercritical CO 2 foaming . Adv. Sustain. Syst. , 2021 , 5 ( 5 ), 2000295 .

Matuana, L. M. ; Diaz, C. A . Study of cell nucleation in microcellular poly(lactic acid) foamed with supercritical CO 2 through a continuous-extrusion process . Ind. Eng. Chem. Res. , 2010 , 49 ( 5 ), 2186 – 2193 .

Su, Y. Z. ; Huang, P. K. ; Sun, J. ; Chen, J. L. ; Zheng, H. ; Luo, H. B. ; Chong, Y. K. ; Zhao, Y. Q. ; Wu, F. ; Zheng, W. G . Extruded polylactide bead foams using anhydrous supercritical CO 2 extrusion foaming . J. Appl. Polym. Sci. , 2023 , 140 ( 42 ), e54557 .

Hayashi, R . Characteristics and cases of inert gas microcellular foaming and supercritical foaming molding . Japan Plastics , 2025 , 76 ( 2 ), 18 – 21 .

Jiang, J. J. ; Wang, L. ; Tian, F. W. ; Li, Y. Z. ; Zhai, W. T . Polymer bead foams: a review on foam preparation, molding, and interbead bonding mechanism . Macromol , 2023 , 3 ( 4 ), 782 – 804 .

Peng, K. M. ; Mubarak, S. ; Diao, X. F. ; Cai, Z. W. ; Zhang, C. ; Wang, J. L. ; Wu, L. X . Progress in the preparation, properties, and applications of PLA and its composite microporous materials by supercritical CO 2 : a review from 2020 to 2022 . Polymers , 2022 , 14 ( 20 ), 4320 .

Oluwabunmi, K. ; D'Souza, N. A. ; Zhao, W. H. ; Choi, T. Y. ; Theyson, T . Compostable, fully biobased foams using PLA and micro cellulose for zero energy buildings . Sci. Rep. , 2020 , 10 ( 1 ), 17771 .

DeStefano, V. ; Khan, S. ; Tabada, A . Applications of PLA in modern medicine . Eng. Regen. , 2020 , 1 , 76 – 87 .

Choi, W. J. ; Hwang, K. S. ; Kwon, H. J. ; Lee, C. ; Kim, C. H. ; Kim, T. H. ; Heo, S. W. ; Kim, J. H. ; Lee, J. Y . Rapid development of dual porous poly(lactic acid) foam using fused deposition modeling (FDM) 3D printing for medical scaffold application . Mater. Sci. Eng. C , 2020 , 110 , 110693 .

Meaney, K. ; Gong, K. ; Gaffney, M. ; Portela, A. ; Devine, D. ; O’Donnell, C. ; Chen, Y. Y . Investigation of mechanical and physical properties of chemically foamed polylactic acid for the purpose of plant growth . Polymer , 2025 , 324 , 128243 .

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Improving the Crystallization Properties and Foaming Behavior of Poly(lactic acid) Enantiomeric Blends through Cross-linking Modification

Hot-press Molding Preparation and Properties of Poly(lactic acid)/Nano-hydroxyapatite Composites

Comprehensive Experimental Design of Polymer Physics Oriented to Hot Issues—Preparation and Characterization of Transparent and Heat-resistant Poly(lactic acid) Film Materials as an Example

Progress on the Preparation and Appliction of Thermosensitive Poly(lactic acid) Material

Separation of Waste Polyester/Cotton Blended Fabrics Using Synergistic Acidolysis of Citric Acid and Zinc Chloride

Related Author

WANG Long

ZHOU Chun-hui

WU Bao-gou

GAO Meng-ju

HAN Ying-chao

LONG Xi

WANG Fei

ZHANG Sheng-wen

Related Institution

Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences

College of Chemical Engineering, Zhejiang University of Technology

State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology

School of Chemical and Material Engineering, Jiangnan University

School of Chemistry, South China Normal University

⁰