are considered as ideal candidates for flexible wearable sensors. However
hydrogels often face a trade-off between mechanical performance and electrochemical properties
limiting their extensive application in flexible wearable sensors. To address the incompatibility between the mechanical and electrochemical properties of hydrogels
we introduced
NaCl into a poly(vinyl alcohol)/polyacrylamide (PVA/PAM) dual-network hydrogel. Using a one-pot synthesis method
we prepared the PVA/PAM/NaCl (PAN) conductive hydrogel. The inclusion of NaCl introduces physical entanglements into the PAN hydrogel
providing a dense three-dimensional network structure. The PAN hydrogel exhibits outstanding mechanical properties
including a tensile strength of 1.06 MPa
an elongation at break of 1550%
and a compressive strength of 2.79 MPa
while also demonstrating high electrical conductivity (2.25 S·m
–1
). Additionally
the strain sensitivity of the PAN hydrogel sensor is 1.089
with a high linear correlation (
R
2
=0.988)
enabling precise and reliable detection of human motion. By attaching PAN hydrogel sensors to various parts of the human body
it is possible to accurately identify signals generated by different muscle movements.
Li, J. Y.; Ding, Q. L.; Wang, H.; Wu, Z. X.; Gui, X. C.; Li, C. W.; Hu, N.; Tao, K.; Wu, J.Engineering smart composite hydrogels for wearable disease monitoring. Nanomicro Lett., 2023, 15(1), 105.
Luo, L. Q.; Wu, Z. X.; Ding, Q. L.; Wang, H.; Luo, Y. B.; Yu, J. H.; Guo, H.; Tao, K.; Zhang, S.; Huo, F. W.; Wu, J.In situ structural densification of hydrogel network and its interface with electrodes for high-performance multimodal artificial skin. ACS Nano, 2024, 18(24), 15754-15768.
Wang, W.; Yao, D.; Wang, H.; Ding, Q.; Luo, Y.; Ding, H.; Yu, J.; Zhang, H.; Tao, K.; Zhang, S.; Huo, F.; Wu, J., A breathable, stretchable, and self‐calibrated multimodal electronic skin based on hydrogel microstructures for wireless wearables. Adv. Funct. Mater. 2024, 2316339.
Zhang, L. M.; He, Y.; Cheng, S.; Sheng, H.; Dai, K.; Zheng, W. J.; Wang, M. X.; Chen, Z. S.; Chen, Y. M.; Suo, Z.Self-healing, adhesive, and highly stretchable ionogel as a strain sensor for extremely large deformation. Small, 2019, 15(21), e1804651.
Wang, Y.; Wang, J. K.; Ma, Z. Z.; Yan, L. F.A highly conductive, self-recoverable, and strong eutectogel of a deep eutectic solvent with polymer crystalline domain regulation. ACS Appl. Mater. Interfaces, 2021, 13(45), 54409-54416.
Lu, C. W.; Wang, C. P.; Wang, J. F.; Yong, Q.; Chu, F. X.Integration of hydrogen bonding interaction and Schiff-base chemistry toward self-healing, anti-freezing, and conductive elastomer. Chem. Eng. J., 2021, 425, 130652.
Wang, S. N.; Zhang, L. L.; Ma, R. T.; Yu, J.; Zhang, X. Y.; Shi, C.; Ma, L. S.; Li, T. Q.; Huang, Y. F.; Hu, Y. L.; Fan, Y. M.; Wang, Z. G.A novel one-pot strategy to construct 3D-printable cellulose nanofiber/poly(deep eutectic solvent) conductive elastomers. Chem. Eng. J., 2023, 454, 140022.
Yang, Y. P.; Wang, H. J.; Hou, Y. Y.; Nan, S. Q.; Di, Y. Y.; Dai, Y.; Li, F.; Zhang, J.MWCNTs/PDMS composite enabled printed flexible omnidirectional strain sensors for wearable electronics. Compos. Sci. Technol., 2022, 226, 109518.
Ren, H. L.; Chen, Y. Y.; Chen, X. L.; He, S. J.; Rong, Q. F.Environmentally stable, highly stretchable strain sensor based on a conductive single-network hydrogel with non-drying and adhesive properties. Eur. Polym. J., 2023, 194, 112164.
Lu, J.; Gu, J. F.; Hu, O. D.; Fu, Y. H.; Ye, D. Z.; Zhang, X.; Zheng, Y.; Hou, L. X.; Liu, H. Y.; Jiang, X. C.Highly tough, freezing-tolerant, healable and thermoplastic starch/poly(vinyl alcohol) organohydrogels for flexible electronic devices. J. Mater. Chem. A, 2021, 9(34), 18406-18420.
Preparation and Properties of Dialdehyde Microfibrillated Cellulose/Poly(vinyl alcohol) Composite Hydrogels with Tunable Mechanical Properties
Preparation and Characterization of Cys-PVA/HEC Triple Shape Memory Hydrogel
Synthesis and Analysis of Thermosensitive Hydrogels from Chitosan/k-Carrageenan Oligosaccharides
Preparation and Properties of Corn Stover Biochar Composite Hydrogel Materials
Exploration on Designing Experiment Teaching of Polymer Medical Materials—Taking “Three-dimensional Network Hydrogel Scaffold Made by Photocuring 3D Printing” as an Example
Related Author
MA Sen-sen
YUE Ying-nan
LIU Jie
QIU Jian-hua
WAN Ji-qiang
TANG Ke-yong
ZHANG Jun
ZHENG Xue-jing
Related Institution
School of Materials Science & Engineering, Zhengzhou University
Technology Center, China Tobacco Henan Industrial Co., Ltd
Institute of Chemistry, Chinese Academy of Sciences
School of Textiles and Fashion, Shanghai University of Engineering Science
College of Life Sciences, Dalian Nationalities University