Ya-meng YU, Chun-xiu GU, Yin-cong BAO. The New Method of Calculating the Molecular Weight and Distribution of Macromolecules in GPC Test by Using Relative Time Method. [J]. Polymer Bulletin 29(11):54-59(2016)
DOI:
Ya-meng YU, Chun-xiu GU, Yin-cong BAO. The New Method of Calculating the Molecular Weight and Distribution of Macromolecules in GPC Test by Using Relative Time Method. [J]. Polymer Bulletin 29(11):54-59(2016) DOI: 10.14028/j.cnki.1003-3726.2016.011.006.
The New Method of Calculating the Molecular Weight and Distribution of Macromolecules in GPC Test by Using Relative Time Method
In the test of the macromolecular weight and molecular weight distribution by Gel permeation chromatography(GPC)
according to the phenomenon that the micromolecule ethylene glycol’s peak time is constant in the system
this research used ethylene glycol’s peak time as a marker
The chromatographs under the relative time are used to establish a calibration curve which istransformed from those under the absolute time. This project solves the problems caused by the repeatability of GPC instrument’s instability
the declination of chromatographic column efficiency and the replacement of chromatographic column in the records of chromatogram
the establishment of calibration curve and the calculation of molecular weight under the real time.
关键词
凝胶渗透色谱相对时间标准曲线
Keywords
Gel permeation chromatographyRelative timeCalibration curve
Application of Gel Permeation Chromatography in Characterization of Polymer Materials
Preparation of the Polymer Nanoparticles with Aggregation-Induced Emission (AIE) and Its Cell Tracing Application
β Nucleation Agent of Polypropylene and Its Influence on Crystallization Behavior of iPP
Research Advances of Multiscale Structure Mediation of Polypropylene: Nucleation Effect and Blending
Recent Progress on Polylactide with High Melt Strength
Related Author
No data
Related Institution
Guangzhou Customs Technology Center
Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education Key Laboratory of Polymer Materials Ministry of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University
School of Chemical Engineering, Lanzhou University of Arts and Science
Zhengzhou Shuqing Medical College
Laboratory of Biomaterials, Affiliated Reproductive Hospital of China Medical University