Tailoring the Melt Viscoelasticity and Crystallization Behavior of Poly (lactic acid) during Processing

Rui-Ying BAO; Xin-Feng WEI; Zhi-Qiang CAO; Hai-Yan YIN; Zheng-Ying LIU; Ming-Bo YANG; Wei YANG

doi:10.14028/j.cnki.1003-3726.2017.10.010

您当前的位置：

首页 >

文章列表页 >

Tailoring the Melt Viscoelasticity and Crystallization Behavior of Poly (lactic acid) during Processing

更新时间：2022-09-06

- Tailoring the Melt Viscoelasticity and Crystallization Behavior of Poly (lactic acid) during Processing
- Polymer Bulletin Vol. 30, Issue 10, Pages: 96-106(2017)
- 作者机构：
  
  四川大学高分子科学与工程学院，高分子材料工程国家重点实验室，成都 610065
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2017.10.010
  CLC：
- Published：01 October 2017，
  
  Received：28 June 2017，
  
  Revised：17 July 2017，
扫描看全文
Rui-Ying BAO, Xin-Feng WEI, Zhi-Qiang CAO, Hai-Yan YIN, Zheng-Ying LIU, Ming-Bo YANG, Wei YANG. Tailoring the Melt Viscoelasticity and Crystallization Behavior of Poly (lactic acid) during Processing. [J]. Polymer Bulletin 30(10):96-106(2017)
DOI：

Rui-Ying BAO, Xin-Feng WEI, Zhi-Qiang CAO, Hai-Yan YIN, Zheng-Ying LIU, Ming-Bo YANG, Wei YANG. Tailoring the Melt Viscoelasticity and Crystallization Behavior of Poly (lactic acid) during Processing. [J]. Polymer Bulletin 30(10):96-106(2017) DOI： 10.14028/j.cnki.1003-3726.2017.10.010.

摘要

聚乳酸(PLA)是目前合成生物可降解高分子材料中应用量最大的品种，可望逐渐部分取代聚烯烃而更广泛应用于各个领域。但PLA树脂结构决定的松弛特性导致其加工过程特殊的黏弹特性，使其熔体强度低、成型工艺特性不稳定并进而导致产品尺寸和性能不稳定。此外，PLA极低的结晶速率，使其在挤出和注射成型等较高冷却速率的实际加工条件下呈无定型态，进一步影响了其加工和使用性能。这些问题已成为PLA更大规模商品化应用的瓶颈。本文从通过调控PLA熔体加工过程的黏弹特性而提高其可加工性出发，综述近年来本课题组在PLA成型加工过程中熔体粘弹特性和结晶行为（结晶速率和结晶结构）调控方面的研究进展。

Abstract

Poly(lactic acid) (PLA) is one of the most applied synthesized degradable polymer materials and is hopeful to substitute polyolefine to be used in general plastic products. However

due to the particular viscoelastic responses resulting from the relaxation characteristic of PLA resin

the low melt strength of PLA causes the instability during processing

and the instability in size and properties of the products

which limits the development of PLA products. Moreover

PLA is usually amorphous after processing owing to its extremely slow crystallization rate in conventional processing conditions in extrusion and injection molding with high cooling rates. The extremely slow crystallization rate and low crystallinity of PLA result in poor processability and performance

which has become the bottleneck of PLA for large-scale commercial applications. Tailoring crystallization of PLA

including crystallinity and crystalline polymorphism

can achieve high performance of PLA. Based on the enhancement of processability of PLA

this paper gives a review on the controlling of melt viscoelasticity

crystallization rate and stereocomplex crystallization during processing of PLA.

关键词

聚乳酸熔体粘弹特性结晶速率立构复合结晶

Keywords

Poly(lactic acid)Melt viscoelasticityCrystallization rateStereocomplex crystallization

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Comprehensive Experimental Design of Polymer Physics Oriented to Hot Issues—Preparation and Characterization of Transparent and Heat-resistant Poly(lactic acid) Film Materials as an Example

Progress on the Preparation and Appliction of Thermosensitive Poly(lactic acid) Material

Preparation and Control of PC/PLA Composite Microsphere via Phase Separation

The Effects Condition on the Nanofibrous Structures of Poly(lactic acid)/ Chitosan Scaffolds and Bio-mineralization Activity

Teaching Exploration and Practice on the Innovation Experiment of Polymer Materials

Related Author

No data

Related Institution

School of Chemical and Material Engineering, Jiangnan University

School of Chemistry, South China Normal University

Key Lab of Functional Molecular Engineering of Guangdong Province in SCUT

Guangdong Industry Polytechnic

College of Ecology and Resources Engineering, Fujian Provincial Bamboo Engineering Technology Research Center, Fujian Key Laboratory of Eco-Industrial Green Technology, Wuyi University

⁰