Research Development of Natural Fibers and Their Extractives Reinforced Polymer Materials for 3D Printing

Jia-nan SHI; Wen LEI; Hai GU

doi:10.14028/j.cnki.1003-3726.2020.01.002

您当前的位置：

首页 >

文章列表页 >

Research Development of Natural Fibers and Their Extractives Reinforced Polymer Materials for 3D Printing

更新时间：2022-08-31

- Research Development of Natural Fibers and Their Extractives Reinforced Polymer Materials for 3D Printing
- Polymer Bulletin Vol. 33, Issue 1, Pages: 17-23(2020)
- 作者机构：
  
  1.南京林业大学,南京 210037
  2.江苏省3D打印装备及应用技术重点建设实验室,南通 226003
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2020.01.002
  CLC：
- Published：20 January 2020，
  
  Received：07 March 2019，
  
  Revised：22 June 2019，
扫描看全文
Jia-nan SHI, Wen LEI, Hai GU. Research Development of Natural Fibers and Their Extractives Reinforced Polymer Materials for 3D Printing. [J]. Polymer Bulletin 33(1):17-23(2020)
DOI：

Jia-nan SHI, Wen LEI, Hai GU. Research Development of Natural Fibers and Their Extractives Reinforced Polymer Materials for 3D Printing. [J]. Polymer Bulletin 33(1):17-23(2020) DOI： 10.14028/j.cnki.1003-3726.2020.01.002.

摘要

3D打印技术作为新型成型技术

近年来受到了巨大的关注

但常见的PLA、ABS等单体打印耗材由于其自身的不同缺点

限制了其进一步的应用。本文综述了植物纤维及其提取物增强聚合物复合材料在3D打印领域的应用研究进展

重点阐述了木纤维、竹纤维

秸秆纤维等常见植物纤维用于3D打印的研究现状

还介绍了纤维素、木质素、半纤维素等植物纤维提取物增强聚合物用于3D打印的研究情况。同时对植物纤维/聚合物材料存在的一些问题及改性方法进行了分析与展望。

Abstract

As a new forming technology

3D printing technology has attracted great attention in recent years. However

the common monomer printing consumables such as PLA and ABS have limited their further application due to their own shortcomings.In this paper

the application and research progress of plant fiber and its extracts reinforced polymer composites in the field of 3D printing were reviewed

with emphasis on the research status of wood fiber

bamboo fiber

straw fiber and other common plant fibers used in 3D printing.The research on 3D printing and the application of polymer reinforced with cellulose

lignin

hemicellulose and other plant fiber extracts are also introduced.At the same time

some problems and modification methods of plant fiber/polymer materials were analyzed and prospected.

关键词

植物纤维提取物聚合物3D打印

Keywords

Natural fiberExtractivePolymer3D printing

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

3D Printing of Plant Fiber/Polymer Composites with Different Physical States

Research Progress on Magnetic Filler/Polymer Based Electromagnetic Interference Shielding Materials

Progress in Flexible Composite Electromagnetic Wave Absorbing Materials

Study on Ultrathin Cryo-section of Several Rubbers and Elastomers

Research Progress of 3D Printing Polyimides

Related Author

No data

Related Institution

College of Science, Nanjing Forestry University

School of Materials Science and Engineering, Liaocheng University

Beijing Key Laboratory for Sensors, Beijing Information Science & Technology University

College of Instrument Science and Optoelectronic Engineering, Beijing Information Science & Technology University

Center of Analysis and Measurement, Zhejiang University

⁰