The Effects Condition on the Nanofibrous Structures of Poly(lactic acid)/ Chitosan Scaffolds and Bio-mineralization Activity

Shu-qiong LIU; Fang-fang WU; Fang-di WU; Zhi-yu LÜ

doi:10.14028/j.cnki.1003-3726.2020.03.005

您当前的位置：

首页 >

文章列表页 >

The Effects Condition on the Nanofibrous Structures of Poly(lactic acid)/ Chitosan Scaffolds and Bio-mineralization Activity

更新时间：2022-08-31

- The Effects Condition on the Nanofibrous Structures of Poly(lactic acid)/ Chitosan Scaffolds and Bio-mineralization Activity
- Polymer Bulletin Vol. 33, Issue 3, Pages: 33-39(2020)
- 作者机构：
  
  武夷学院生态与资源工程学院福建省生态产业绿色技术重点实验室,武夷山 354300
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2020.03.005
  CLC：
- Published：20 March 2020，
  
  Received：11 January 2019，
  
  Revised：01 December 2019，
扫描看全文
Shu-qiong LIU, Fang-fang WU, Fang-di WU, Zhi-yu LÜ. The Effects Condition on the Nanofibrous Structures of Poly(lactic acid)/ Chitosan Scaffolds and Bio-mineralization Activity. [J]. Polymer Bulletin 33(3):33-39(2020)
DOI：

Shu-qiong LIU, Fang-fang WU, Fang-di WU, Zhi-yu LÜ. The Effects Condition on the Nanofibrous Structures of Poly(lactic acid)/ Chitosan Scaffolds and Bio-mineralization Activity. [J]. Polymer Bulletin 33(3):33-39(2020) DOI： 10.14028/j.cnki.1003-3726.2020.03.005.

摘要

以二氧六环/冰醋酸为溶剂体系

采用相分离法制备了聚乳酸(PLA)/壳聚糖(CS)复合纳米纤维结构的组织工程支架

探讨了不同CS含量、不同凝胶温度及不同分子量对PLA/CS复合支架纳米纤维结构的影响以及支架的生物活性。结果表明

凝胶温度对PLA/CS复合材料的纳米纤维结构影响较大

且随着温度的降低

结构的微观尺寸也逐渐增大

从纳米级上升到普通的尺寸结构;CS含量对PLA/CS复合支架的基体结构影响不大;实验范围内PLA分子量对PLA/CS复合支架的纳米纤维结构有重要影响:分子量大的样品

较易得到PLA/CS复合纳米纤维结构的材料

而分子量小的样品则不能得到纳米纤维结构。另外

生物矿化实验表明CS的添加有利于PLA/CS复合材料生物活性的提高。

Abstract

Poly(lactic acid)(PLA)/chitosan(CS) composite nanofibrous scaffolds were fabricated from a quaternary PLA/CS/dioxane/glacial acetic acid system by phase separation method. The effects of gelation temperature

CS content and the molecular weight of PLA on the morphology of composite scaffolds were investigated. The results revealed that gelation temperature and the molecular weight of PLA significantly influenced the formation of nanofibrous structure

but the CS content had very litter effect on the nanofibrous structure. The microstructure of the PLA/CS composite scaffolds changed greatly with the reduction of gelation temperature

from nano-structure to micro-structure. Besides

high molecular weight of PLA make for nanofibrous structure easier than the low molecular weight of PLA in this work. The mineralization results showed that PLA/CS composite nanofibrous scaffolds could induce hydroxyapatite formation faster than pure PLA nanofibrous scaffolds.

关键词

聚乳酸壳聚糖纳米纤维生物活性

Keywords

Poly(lactic acid)ChitosanNanofibrousBioactivity

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Advance of Poly(lactic acid) Modified Chitosan in the Field of Biomedical

Comprehensive Experimental Design of Polymer Physics Oriented to Hot Issues—Preparation and Characterization of Transparent and Heat-resistant Poly(lactic acid) Film Materials as an Example

Preparation of Poly(acrylic acid)/Graphene Oxide-Chitosan Composite Membrane and the Adsorption and Separation on Dyes

Material Properties and Progress in Modification of PMMA Bone Cement

Preparation and Catalytic Properties of Carbon Dioxide-assisted Chitosan/Silver Hydrogel Beads

Related Author

No data

Related Institution

North University of China School of Science

Shool of Chemical Engineering and Environment North University of China

School of Chemical and Material Engineering, Jiangnan University

Fujian Key Laboratory of Novel Functional Textile Fibers and Materials, Minjiang University

Fujian Jinhuang Environmental Protection Technology Co.,Ltd.

⁰