Research Progress on Surface Modification of Ultra-high Molecular Weight Polyethylene Fiber

Qing SHANG; Han ZHAO; Ning ZHAO; Yi-ping ZHAO; Xiao-pin YIN; Cai-ling DING; Jian XU

doi:10.14028/j.cnki.1003-3726.2020.04.003

您当前的位置：

首页 >

文章列表页 >

Research Progress on Surface Modification of Ultra-high Molecular Weight Polyethylene Fiber

更新时间：2022-08-31

- Research Progress on Surface Modification of Ultra-high Molecular Weight Polyethylene Fiber
- Polymer Bulletin Vol. 33, Issue 4, Pages: 22-29(2020)
- 作者机构：
  
  1.天津工业大学材料科学与工程学院省部共建分离膜与膜过程国家重点实验室,天津 300387
  2.中国科学院化学研究所高分子化学与物理实验室,北京 100190
  3.山东如意科技集团有限公司,济宁 272073
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2020.04.003
  CLC：
- Published：20 April 2020，
  
  Received：05 September 2019，
  
  Revised：13 November 2019，
扫描看全文
Qing SHANG, Han ZHAO, Ning ZHAO, Yi-ping ZHAO, Xiao-pin YIN, Cai-ling DING, Jian XU. Research Progress on Surface Modification of Ultra-high Molecular Weight Polyethylene Fiber. [J]. Polymer Bulletin 33(4):22-29(2020)
DOI：

Qing SHANG, Han ZHAO, Ning ZHAO, Yi-ping ZHAO, Xiao-pin YIN, Cai-ling DING, Jian XU. Research Progress on Surface Modification of Ultra-high Molecular Weight Polyethylene Fiber. [J]. Polymer Bulletin 33(4):22-29(2020) DOI： 10.14028/j.cnki.1003-3726.2020.04.003.

摘要

超高分子量聚乙烯(UHMWPE)纤维具有诸多优异性能

因此被广泛应用于纤维增强复合材料(FRP)。但是由于UHMWPE纤维表面光滑且无极性基团

与树脂基体粘接性差

可通过纤维表面改性有效提高FRP的界面强度

进而提升材料性能。本文总结了近几年基于化学处理、等离子体处理、电晕放电和辐射引发表面接枝等方法对UHMWPE纤维表面改性的研究进展

并对改性方法的发展进行了展望。

Abstract

Ultra-high molecular weight polyethylene (UHMWPE) fibers are widely used in fiber reinforced polymers (FRP) because of their excellent properties. However

UHMWPE fibers inherently exhibit poor adhesion owing to the low surface free energy and the lack of polar functional groups

which affect the performance of the composites and limit their application. Surface modification can effectively increase the interface strength of FRP and thus improve the properties of the materials. In this review

the recent research progress on the surface modification of UHMWPE fibers

with the emphasis on chemical treatment

plasma treatment

corona discharge and radiation-induced surface grafting method

has been summarized

and the development of modification method is prospected.

关键词

纤维增强复合材料超高分子量聚乙烯树脂基体复合界面粘附理论界面强度

Keywords

FRPUHMWPESurface modificationInterface

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Emergence of Chain Entanglement of UHMWPE in "Semi-Dilute Solution"

Study and Development on Morphology, Mechanical Properties, and Toughening Mechanism of the Blends based on Polypropylene and Ultrahigh Molecular Weight Polyethylene

Related Author

No data

Related Institution

Department of Polymer Science and Engineering,Key Laboratory of Specialty Polymers,Faculty of Materials Science and Chemical Engineering , Ningbo University

Key Laboratory of Beijing City on Preparation and Processing of Novel Polymer Materials, School of Materials Science and Engineering, Beijing University of Chemical Technology

⁰