Progress in the Research of Modification of Polypropylene Battery Separator

Lei YUAN; Yong-biao ZHOU; Zi-qi CHEN; Chu-fan JING

doi:10.14028/j.cnki.1003-3726.2020.12.004

您当前的位置：

首页 >

文章列表页 >

Progress in the Research of Modification of Polypropylene Battery Separator

更新时间：2022-08-31

- Progress in the Research of Modification of Polypropylene Battery Separator
- Polymer Bulletin Vol. 33, Issue 12, Pages: 24-33(2020)
- 作者机构：
  
  1.中国科学院化学研究所,北京 100190
  2.中国科学院大学,北京 100049
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2020.12.004
  CLC：
- Published：20 December 2020，
  
  Received：23 September 2019，
  
  Revised：26 October 2020，
扫描看全文
Lei YUAN, Yong-biao ZHOU, Zi-qi CHEN, Chu-fan JING. Progress in the Research of Modification of Polypropylene Battery Separator. [J]. Polymer Bulletin 33(12):24-33(2020)
DOI：

Lei YUAN, Yong-biao ZHOU, Zi-qi CHEN, Chu-fan JING. Progress in the Research of Modification of Polypropylene Battery Separator. [J]. Polymer Bulletin 33(12):24-33(2020) DOI： 10.14028/j.cnki.1003-3726.2020.12.004.

摘要

信息时代的发展对二次电池的性能提出了更高要求。隔膜作为电池的关键组成部件之一

其性能优劣直接影响到电池的整体性能。目前市场上普遍使用的聚丙烯隔膜由于其电解质润湿性低、热稳定性差等缺点

严重限制了电池性能的发挥。因此

对聚丙烯电池隔膜进行改性是获得高性能电池的重要途径。近年来

研究人员通过构建多层结构、表面涂覆和表面接枝等方法对聚丙烯电池隔膜进行改性。本文综述了聚丙烯电池隔膜改性的最新研究进展。

Abstract

With the development of the high-tech information era

we have put forward higher requirements for the performance of secondary batteries. As one of the key components of the battery

the separator directly affects the overall performance of the battery. The traditional commercial polypropylene separator has limited the performance of the battery due to its low electrolyte wettability and poor thermal stability. Therefore

modification of the polypropylene battery separator is an important method to obtaining a high performance battery. In recent years

researchers have modified the polypropylene separators by surface coating

surface grafting and constructing multilayer structure to improve the performance of batteries. This paper introduces the latest research progress of the modification of polypropylene separator.

关键词

聚丙烯电池隔膜锂离子电池锂硫电池

Keywords

PolypropyleneBattery separatorLithium-ion batteryLithium-sulfur battery

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Influences of Polypropylene on Phase II-I Transformation of Polybutene-1

Progress in β-Nucleating Agent for Polypropylene

Connecting the Knowledge in Polymer Physics through the Comprehensive Experimental Teaching Design of Polypropylene Foaming Materials

Case Teaching of Polymer Physics Based on the Technology of Preparing Lithium-ion Battery Separator of Polypropylene

Research Progress of Special Resin for Thin-wall Injection Molding Polypropylene

Related Author

No data

Related Institution

Shandong Provincial Key Laboratory of Olefin Catalysis and Polymerization, Key Laboratory of Rubber-Plastics (Ministry of Education), School of Polymer Science and Engineering, Qingdao University of Science and Technology

Beijing National Laboratory for Molecular Science, CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences

Chongqing School, University of Chinese Academy of Sciences

Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences

College of Materials Science and Engineering, Chongqing University of Technology

⁰