Melting Temperature Measurement of Polyoxymethylene and Poly(ethylene oxide) under High Pressure

Ju WANG; Ce LIANG; Xiu-ru LIU

doi:10.14028/j.cnki.1003-3726.2022.11.008

您当前的位置：

首页 >

文章列表页 >

Melting Temperature Measurement of Polyoxymethylene and Poly(ethylene oxide) under High Pressure

更新时间：2022-09-09

- Melting Temperature Measurement of Polyoxymethylene and Poly(ethylene oxide) under High Pressure
- Polymer Bulletin Vol. 35, Issue 11, Pages: 82-89(2022)
- 作者机构：
  
  西南交通大学高温高压物理研究所,成都 610031
- 作者简介：
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2022.11.008
  CLC：
- Published：20 November 2022，
  
  Received：10 November 2021，
  
  Revised：26 March 2022，
扫描看全文
Ju WANG, Ce LIANG, Xiu-ru LIU. Melting Temperature Measurement of Polyoxymethylene and Poly(ethylene oxide) under High Pressure. [J]. Polymer Bulletin 35(11):82-89(2022)
DOI：

Ju WANG, Ce LIANG, Xiu-ru LIU. Melting Temperature Measurement of Polyoxymethylene and Poly(ethylene oxide) under High Pressure. [J]. Polymer Bulletin 35(11):82-89(2022) DOI： 10.14028/j.cnki.1003-3726.2022.11.008.

摘要

研究聚合物在预置过冷度和压力下的结晶行为

前提条件是了解高压下聚合物的熔融和结晶温度。本文采用差热分析法测量了50~300 MPa压力范围内聚甲醛和聚氧化乙烯的熔融温度。实验表明聚甲醛和聚氧化乙烯的熔融温度随着压力的增加而升高

拟合的Tm(P)关系式分别为Tm (K)=441.2+0.1044P (MPa)和Tm(K)=345.1+0.1143P (MPa)。对回收样品进行XRD分析

发现100、200、300 MPa压力下聚甲醛和聚氧化乙烯熔体的凝固结构

具有与常压下熔体凝固相同的晶型

表明该相在300 MPa以内为稳定相。本文的实验结果为开展高压下聚甲醛和聚氧化乙烯熔体的结晶研究提供了参考。

Abstract

The melting temperature and crystallization temperature under high pressure are of importance for studying the high-pressure crystallization and annealing of polymers. In this study

the melting temperature of polyoxymethylene (POM) and poly(ethylene oxide) (PEO) were measured by the differential thermal analysis method in the range of 50~ 300 MPa. It was found that the melting temperatures of POM and PEO increased with the increasing pressure. The fitted T

(P) relationships were T

(K)=441.2+0.1044P (MPa) and T

(K)=345.1+0.1143P (MPa) for POM and PEO

respectively. The XRD analysis revealed that the recovered samples which crystallized under 100

200 and 300 MPa had the same structure with that under ambient pressure

indicating that the structure of crystal phase is stable up to 300 MPa. The experimental results in this study provide reference data for the high-pressure crystallization and annealing of POM and PEO.

关键词

聚甲醛聚氧化乙烯高压差热分析熔融温度结晶温度

Keywords

PolyoxymethylenePoly(ethylene oxide)High-pressure differential thermal analysisMelting temperatureCrystallization temperature

references

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Filling Behavior of Polyoxymethylene/Poly(Ethylene Oxide)/SiO₂ Ternary Composite System under Microinjection Molding Conditions

Effect of Molecular Weight of PEO on Solution Crystallization of POM/PEO Blend

Influence of Blending Elastomers on the Crystallization Behavior and Mechanical Properties of Polyoxymethylene

Research Progress in Modified Polyoxymethylene

Advances in the Synthesis of Polyoxymethylene

Related Author

No data

Related Institution

State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University

Analytical and Testing Center, Sichuan University of Science and Engineering

State Key Laboratory of Polymer Materials Engineering, Sichuan University

College of Polymer Science and Engineering,State Key Laboratory of Polymer Materials Engineering, Sichuan University

Performance Material Center,National Institute of Clean-and-Iow-carbon Energy

⁰