UHMWPE纤维的超临界CO<sub>2</sub>辅助渗透预处理研究

代栋梁; 施楣梧

doi:10.14028/j.cnki.1003-3726.2016.07.011

您当前的位置：

首页 >

文章列表页 >

UHMWPE纤维的超临界CO₂辅助渗透预处理研究

研究简报 | 更新时间：2022-09-12

- UHMWPE纤维的超临界CO₂辅助渗透预处理研究
- Study on Auxiliary Osmosis Pretreatment of UHMWPE Fibers in Supercritical Carbon Dioxide
- 高分子通报 2016年29卷第7期页码：82-90
- 作者机构：
  
  1.东华大学纺织学院，上海 201620
  2.总后勤部军需装备研究所，北京 100082
- 作者简介：
  
  *E-mail：dong.liang1102@163.com.
- 基金信息：
- DOI：10.14028/j.cnki.1003-3726.2016.07.011
  中图分类号：
- 纸质出版日期：2016-07-20，
  
  收稿日期：2015-12-01，
  
  修回日期：2016-03-04，
扫描看全文
代栋梁, 施楣梧. UHMWPE纤维的超临界CO₂辅助渗透预处理研究[J]. 高分子通报, 2016,29(7):82-90.

Dong-liang DAI, Mei-wu SHI. Study on Auxiliary Osmosis Pretreatment of UHMWPE Fibers in Supercritical Carbon Dioxide[J]. Polymer Bulletin, 2016,29(7):82-90.
代栋梁, 施楣梧. UHMWPE纤维的超临界CO₂辅助渗透预处理研究[J]. 高分子通报, 2016,29(7):82-90. DOI： 10.14028/j.cnki.1003-3726.2016.07.011.

Dong-liang DAI, Mei-wu SHI. Study on Auxiliary Osmosis Pretreatment of UHMWPE Fibers in Supercritical Carbon Dioxide[J]. Polymer Bulletin, 2016,29(7):82-90. DOI： 10.14028/j.cnki.1003-3726.2016.07.011.

摘要

利用Minitab软件设计实验，以超高分子量聚乙烯纤维(UHMWPE)为原料，研究了在不同的超临界CO

流体状态下，处理压力、温度和时间等因素对三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)渗入率的影响，确定了最佳因素设置范围；通过单因子实验优化了超临界CO

处理工艺，并对经过电子束辐照的UHMWPE纤维凝胶含量和蠕变率进行了测试。研究结果表明：处理温度对TMPTMA的渗入率影响最大，其次为压力，时间的影响最小，确定了最优工艺条件为处理压力25MPa，温度80℃，时间30min；TMPTMA渗入率越高，电子束辐照后UHMWPE纤维的增感辐照交联效应和抗蠕变效果越好。

Abstract

With the ultra-high molecular weight polyethylene (UHMWPE) fibers as materials

the influence of processing pressure

temperature and time on the infiltration rate of trimethylolpropane trimethacrylate(TMPTMA) under the different supercritical carbon dioxide fluid state using Minitab software to design experiment were studied and the optimal set range of factors were determined ; The supercritical CO

process was optimized through the signal factor experiment

in addition

the gel content and creep rate of UHMWPE fibers after electron beam irradiation were tested. The results showed that the processing temperature had the most significant effect on the infiltration rate of TMPTMA

followed by pressure

time had the minimal effect. The optimal conditions were processing pressure 25Mpa

temperature 80℃

time 30min; The higher the infiltration rate of TMPTMA was

the better effects of sensitizing irradiation crosslinking and anti-creep of UHMWPE fibers after electron beam irradiation were.

关键词

超高分子量聚乙烯纤维超临界二氧化碳电子束辐照渗入率Minitab

Keywords

Ultra-high molecular weight polyethylene fiberSupercritical carbon dioxideElectron-beam irradiationInfiltration rateMinitab

references

更多指标>

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

尼龙6微孔发泡材料的制备及泡孔形貌调控

超临界二氧化碳活化提升多孔有机聚合物的比表面积和气体吸附性能的研究

超临界二氧化碳中聚合体系的发展与新型功能高分子材料的制备

超临界二氧化碳中的高分子合成

超临界CO2在高分子合成与制备中的应用

UHMWPE纤维的超临界CO2辅助渗透预处理研究

Study on Auxiliary Osmosis Pretreatment of UHMWPE Fibers in Supercritical Carbon Dioxide

DOI：10.14028/j.cnki.1003-3726.2016.07.011

摘要

Abstract

关键词

Keywords

references

UHMWPE纤维的超临界CO₂辅助渗透预处理研究